Thursday, October 22, 2015

DIY Barbie Doll House: Week #2 Cutting, Sanding, Priming


Welcome to the DIY Barbie Doll House. I've been a bit stalled on posting, but I have been working hard and will get two up this week, and two up next week. If you want to catch up, here's Week #1 DIY Barbie Doll House.

Everything was done, but I wasn't sitting down long enough last week to post.

Besides doing the scheduled Week #2 Cutting, Sanding, Priming there was still more planning and finally deciding on the appropriate lighting as well as ferreting out moldings, colors and fabrics. More on that later.

oldnewgreenredo

 After consulting the plans...we decided on a couple of adjustments and made the doorways and stairways 1/2"-1" wider than originally planned within the 48" width of the house.

I measured out the windows, doorways, and stair holes on the pre-cut 1/2"plywood pieces. Hubby cut the large pieces on the table saw and the holes with a saber saw.

There are twelve pieces in this house: 2 roofs, 3 floors with holes for stairways, 2 side walls with window cutouts,  1 garage wall, 1 bathroom wall on bottom floor, 1 kitchen wall on the stairway (open in a triangle) to  stairway to third floor, 1 bedroom/bathroom wall on the third floor 
and 1 back piece with the roof pitch.

We did not make any exterior doorways, (imagine them on the open side of the house)

oldnewgreenredo


On the bottom is the east wall of Ken's Bathroom on the stack of 16" wide sidewalls, floors and roof pieces. All surfaces were sanded with 60-grit sandpaper with an orbital sander. It has a dust bag attachment that basically doesn't work, so I did all the sanding outside.

oldnewgreenredo

This is one of the roof pieces, which we have left the full 48" and will cut after we see it assembled.


oldnewgreenredo
 After sanding it was clear the 'bad' sides of the plywood had a few knots and dark spots. Not willing to fight dark marks seeping through my primer and paint, I gave all dark spots and knots a good brushing of shellac. It dries quickly and seals up many imperfections.

oldnewgreenredo

I use sponge brushes for almost everything but detail work. They do not last long with shellac.
Since I had 12 pieces to deal with and 24 surfaces, I spread out on 3 sets of saw horses. The weather was warm, with low humidity, so everything dried very fast.

Next step was to fill all holes, dents, scrapes and knotholes. I used a new purple version of Elmer's wood filler that dried between white...with little shrinkage.After doing 24 surfaces...the first ones were already dry.

oldnewgreenredo

I rolled a latex primer on all surfaces very quickly because the weather started to look like rain...!

oldnewgreenredo

The dollhouse pieces all dried fast. Now the hard part is trying to picture new colors in the new Barbie house. One reason we are doing this, is the abominable purple and magenta pink PLASTIC for Barbie. So we are hoping to make the house a home, with more realistic colors and furnishings. Not that there won't be SOME pink.


oldnewgreenredo

Here are the middle walls for between the rooms with their doorways. It is a puzzle. Most of the materials used from now on except moldings will be recycled or vintage.

Now choosing, pink multi for the bedroom and bathroom, green & white for the kitchen, and white, green, teal for the living/dining room, and sand/beige/wood for the first floor Ken's Man Cave and bathroom + Chicago sports colors. Having had boys, I almost think I'm looking forward to the 'mancave' more than anything.

Ken's says so too, he's really tired of sitting in a pink and white bathtub and is looking forward to his
own shower in sand beige.

oldnewgreenredo

Coming soon, DIY Barbie House: Week #3 Windows and Surfaces--COLOR!



All the opinions and photographs in this blog are my own, I have not been paid or reimbursed in anyway for my opinions or posts. Please do not use my photos without linking back to this blog without my permission. 
Thank you for your cooperation, Sandi Magle 

And always, thanks for stopping by, 

Sharing at these parties: 
What's It Wednesday 
Share Your Cup Thursday
Vintage Charm 
Simple & Sweet Fridays
friday-features-linky-party-
Think and Make Thursday 
Funtastic Friday 
Shabbilicious Friday 
Feathered Nest Friday 
Best of the Weekend 
Silver Pennies Sundays 
That DIY Party 
Party in Your PJ's 
 Merry Monday Link Party
Metamorphisis Monday 



Sandi


7 comments:

  1. How amazing! Your attention to detail is amazing!
    Have a lovely fall weekend.

    ReplyDelete
  2. Oh your little one is going to be so thrilled. Great to see your progress. I ordered my first tier cookie stand part can't wait to make one!

    ReplyDelete
  3. Thanks for stopping, next post will be a bit more exciting----COLOR, lol

    ReplyDelete
  4. Sandi, this is quite the project, but a fun one! We gave our youngest daughter a large Barbie house like this for Christmas one year. We did not make it. I bought it at a local boutique. She played with it a ton! Thanks for sharing with SYC.
    hugs,
    Jann

    ReplyDelete
    Replies
    1. Thanks for stopping, we are retired, sort of...so making this is fun!

      Delete
  5. Oh my, Sandi, what an undertaking! You guys are pretty amazing putting this whole thing together and then decorating it too. Looks like a labor of love :) Thanks so much for linking up your special project with Vintage Charm.

    ReplyDelete
  6. What a project! Thanks so much for sharing with us at Merry Monday.

    ReplyDelete

Thank you for any and all comments. I will be happy to answer any questions or comments in replies or email! HUGS!