Tuesday, November 17, 2015

DIY BarbieDollhouse:Wk#5 Final Lighting

This is the second half of last week's post. Last week just got away from me. So....you will see some inconsistencies in continuity here.

Point is, this post is about lighting our NEW DIY Barbie dollhouse. After searching online, I saw Christmas lights dangling from inside cardboard houses (shudder)---battery candle lights dimly lighting cubbyholes of rooms, and rooms conventially lit with dollhouse lighting totally in the wrong scale of 1:12 instead of double that, or 1:6 for Barbie. What should we use?

Christmas lights and sockets, with little wires sticking out,  was out of the question for a three-year old.

Convential dollhouse lighting would run over $100.00 with this size dollhouse and would involve metallic tape, wall sockets, tiny wiring and still having to secure/hide it. Light fixtures were all over the place in price and would be scaled too small. So we started another search.

oldnewgreenredo

Looking online, I found rope lighting and LED under cabinet lighting. Our china cabinet lights (round) LED's would be too bright. They were designed to light up an entire cabinets. So I looked for something softer and scaled smaller.

IKEA had some LED strip lights (set 4) that could be hooked together or installed individually. They gave softer light then other things we saw. Price was good---19.99 for a set of 4--we bought two sets and used 6 light panels-one for each room, so actual cost was 29.99.

oldnewgreenredo

Hubby began by drilling holes in the back large enough to run the wires through. Because we wanted everything enclosed, we made plans to encase the wires in the 'magic' plastic molding and then cover with ceiling trim afterward. The LED's strips came with ample cord, more than enough cord for the 4'x4' size of this dollhouse.

From the back Hubby ran the cords along the divider walls, along the center beam, across the front to the fixture strips.

oldnewgreenredo

Here you can see the slack wires hanging in each room and the actual lights showing at the front of the rooms. By lighting from the front, the lights cast light all over the rooms. We planned on scalloped molding trim to cover the lights, making the light shine into the house.


oldnewgreenredo

On the upper right room, you can see the pieces of 'magic' plastic channel molding I used in the last post,  Wk#5 Landings and Stairs getting ready to secure the wires. Hubby glued the plastic channel directly to the walls and beam with Gorilla Super Gel Glue.
oldnewgreenredo
 Here is a fuzzy closeup of the plastic channel molding. Very inexpensive, cuts with an exacto knife or a scissors. Also flexible so easy to work with.

oldnewgreenredo

Here is a light strip attatched to the ceiling. These lights are attatched to screwed in clips. Nothing is exposed. and the channel covers the wires in the front and along the dividing room walls.


oldnewgreenredo

Sorry for the tilt--getting these pics was tricky. Here you can see the pink wall with the molding installed over the plastic channel all the way to the back.

oldnewgreenredo

In the back the light wires were pushed into these little junction boxes which will be covered by a fake box/chimney, which we will show when completed with the rest of the exterior completion.



 This picture is taken of the kitchen area with some furniture just set in place...that rug has to go. No flash, RL lights, so the light looks perfect. Kitchen plans are still not final, but the table will become a drop leaf---and painted either green or white? What do you think? The pink is going on the appliances, they will be white with stainless steel..look--and we have to build the stove and counters.

oldnewgreenredo
This room was also lit with only the dollhouse lights. The master bedroom furniture temporarily laid out so we can see what we need to do. All the ceiling moldings are installed and the lighting is complete. The matress is on the floor, bed still needs to be delivered, but of course Ken is napping, again!

oldnewgreenredo

The bathroom roughly laid out. One piece of floor molding still needed to be installed, but all the touch-up was done. The strips of white are more bits of trimmed plastic channel from the landings, simply glued on the walls. Looks like a tile edge.


oldnewgreenredo
Here's the garage area with its gray painted floor and the garbage can---which was a pencil container in school promo from Walmart, for 1.99...and the perfect size, lid opens and has little wheels, tooo adorable...and GREEN.

oldnewgreenredo

 Completed stairway from the man cave to the second floor.  Temporary furniture arrangement in the background.
oldnewgreenredo

Close up of the moldings/trim all painted and Ken's closet/cabinet installed under the wierd windows. My daughter-in-law commented it was a custom fit, lol. The shower on the back left still needs to be painted and installed...you always have to wait for plumbers!

oldnewgreenredo
Hubby did take this picture with a flash...but you have seen how great the LED lights work. We have opted not to have any lit fixtures or lamps. There may be a couple of battery lights...but the rooms are nice and bright with the LED strips.  However, this post is not a recommendation of- or for- any products or use of products as safe for children. Please follow all manufacturer's suggestions and installation recommendations.

Now to get to working on all these furnishings--and make them not so retro, crazy colors. Everything begged, borrowed and thrifted needs to morph into some assemblence of a tastefully decorated home. More to follow on Barbie's thrifty and thrifted furnishings. I did buy the to toilets and Refrigerator new, and the green table and dining chairs. My daughter-in-law is constructing the hanging chandeliers and lamps...which will be for show and she will work on many of the miniature food, magazines, books, etc, things for th house.


Thanks for stopping by, and I will be happy to answer any questions or comments.



All the opinions and photographs in this blog are my own or I am in possesion of the originals, 
I have not been paid or reimbursed in anyway for my opinions, posts or products used. 
Please do not use my photos without linking back to this blog without my permission. 
Thank you for your cooperation, Sandi Magle 
Sharing at these fine parties this week, 
 Sandi



15 comments:

  1. It looks so cute! I am getting excited for Christmas for your little one.

    ReplyDelete
  2. That is really sweet. What a great project.

    ReplyDelete
  3. Very cute! Can't wait to have a peek at the finished doll house. Thanks for sharing.

    ReplyDelete
  4. Wonderful! Just love the time and attention to detail that you and your husband have put into this. Can't wait to see the rest. I might paint the kitchen table a bright pink or a light purple. That's what my Bebe loves... also aqua is big with the little girls.

    ReplyDelete
  5. Wow, that is amazing! And you're ideas for covering up the wires to make the dollhouse more child-friendly are brilliant. I especially like the idea of covering the junction boxes with a chimney. I was wondering what you were going to do with those. The house is beautiful. I can't wait to see it finished!

    ReplyDelete
    Replies
    1. Second choice was to use tube Christmas lights, but there would be no switch and no mountings really enclosed. It's just something one has to make a decision about---nothing is child-proof...hence the warnings on everything that say not for children under 3 years of age...whether it is a ball or a bangle bracelet. Thanks for your interest and comment, grins, Sandi

      Delete
  6. I appreciated learning about your LED lighting for the doll house. Lighting is my challenge because it has to be not too harsh and also affordable. ours is perfect.

    I think any little girl would love this Barbie house as it is right now, so it can only get better. I am excited to see the finished project.

    ReplyDelete
  7. The lighting feature makes this house so special! My granddaughter is almost 3 so I'm sure in a few years she would love if her parents build a Barbie house for her like this one. I'll pin your post fro future reference. Thanks!

    ReplyDelete
  8. Gosh, that Ken sure likes his naps. lol! The house is turning out so darn cute. Great idea to use the rope lighting. I remember that the summer of 6th grade my family went to Disneyland. I brought a set of wicker furniture like that chair home from Knotts Berry Farm as my souvenir. I played with it for years with my Barbies. Thanks for sharing with SYC.
    hugs,
    Jann

    ReplyDelete
    Replies
    1. I think everyone had a set of those chairs...the wicker for their dolls (8"muffy, ginny) Ken can even lean back and take his nap in his...LOL...he does nap a lot. thanks for stopping by, Sandi

      Delete
  9. Absolutely wonderful, every bit of it, and now with lighting! Someone is going to be very happy this Christmas...thanks for linking up with Vintage Charm :)

    ReplyDelete
    Replies
    1. Thanks Diana for stopping by, Most of the contents is vintage...so I will be trying to do some research on all my Barbie finds. Thanks again, Sandi

      Delete
  10. What an awesome house this is! I love the idea of the way you did the lighting for it. I've got the tape in my doll house. And I love the trash can in the garage. There's going to be one happy and thrilled little girl when she gets this house.

    ReplyDelete
    Replies
    1. Aw thanks, Carol. The strip lighting is really nice and overall soft---problem with the strip lighting for Barbie was the scale of all the fixtures, Barbie is double size (1:6 scale) of traditional dollhouse lighting,(1:12 scale) lol. Hubby is working ont he kitchen counters and the stove...omg..he is crazy and it is so cute. Maybe I can post again soon! Thanks for following so closely, Sandi

      Delete

Thank you for any and all comments. I will be happy to answer any questions or comments in replies or email! HUGS!